In the event that a fire occurs at your commercial property, it’s vital to have emergency response measures in place—such as an effective sprinkler system—to suppress the flames as quickly as possible and minimize potential damages. In addition to a sprinkler system, a fire department connection (FDC) can also play a major role in your property’s emergency response plan.
Having an FDC at your workplace can allow your local fire department to pump additional water into the property’s existing sprinkler system during a fire, suppressing the flames to more manageable levels before physically entering the building to finish the job. National Fire Protection Association (NFPA) standards require FDCs on all sprinkler systems (NFPA 13) and standpipe systems (NFPA 14).
Review the following guidance to learn more about how FDCs work and best practices for keeping your property’s FDC in good condition.
How FDCs Work
Although sprinkler systems can kickstart the fire suppression process, such systems’ water supplies and pressure levels can vary. An FDC can serve as an external connection to a property’s sprinkler system. When a fire occurs, this connection—which consists of an inlet and piping system—can be utilized by the impacted building’s local fire department to rapidly suppress the flames with an additional water supply and heightened pressure, increasing firefighters’ ability to get the fire under control before actually entering the building.
To accomplish this, the fire department connects a hose line from the fire engine to the FDC and pumps extra water into the building’s sprinkler system, thus providing an adequate amount of water pressure to mitigate the flames in a timely, efficient manner.
FDCs are typically located on the outside of the property they protect, but can sometimes be completely separated from the building altogether. Such FDCs are known as freestanding or sidewalk FDCs. In any case, NFPA 13 requires FDCs to be located on the street side of the property (if possible).
Apart from location, FDCs should also be clearly labeled with proper signage that states what type of system the connection supplies (standpipe system or sprinkler system), the level of water pressure that the connection requires and whether the connection supplies just a portion or the entirety of the building.
Most sprinkler systems have an FDC with two inlets. However, depending on both the size of the premises and sprinkler system risers within the building, a property may need additional inlets. Be sure to review applicable fire codes, as well as consult your community’s fire department to determine your property’s specific FDC requirements.
Maintaining FDCs
Keeping your property’s FDC in good condition is critical to ensure its effectiveness. Without proper care and maintenance measures in place, FDCs can easily become blocked, plugged, clogged or otherwise damaged—making the connection difficult to locate or potentially unusable in the event of a fire.
Follow these tips for maintaining your FDC:
In addition to these maintenance tips, make sure you reach out to your local fire department and invite them to your property to review your FDC. During this visit, the fire department can familiarize itself with the location of your building’s FDC and conduct a visual inspection of the connection to ensure everything is in good condition.
For more risk management guidance, contact us today.
Source – Zywave, Inc.